Diamond grinding wheel with its high quality grinding performance is popular, but in use if you do not follow the steps and use precautions, it will not reach the expected grinding effect, diamond grinding wheel working , also known as diamond , composed of abrasive, binder and filler, is the working part of the grinding tool, transition , also known as non-diamond , composed of binder, l powder and filler. It is the part that firmly connects the diamond to the matrix.

Diamond grinding wheel is made of diamond abrasive as raw material, with l powder, resin powder, ceramic and electroplated l as bonding agent, the central hole of the circular consolidation grinding tool, with high strength, good heat resistance, sharp cutting, high grinding efficiency, grinding process is not easy to heat and plug, small thermal expansion.

Common frontal operating control problems cause accidents

In daily use, many operation controllers are always used to operate against the grinding wheel, the reason is that this direction can be used with strength, in fact, this behavior is the grinder operation should be specifically prohibited behavior, according to the operating rules, the use of grinder grinding workpiece, the operator should stand on the side of the grinding wheel, not in the front of the grinding wheel to operate, so as to avoid the wheel failure. The grinding wheel flies out or the grinding wheel breaks and flies out.

Side grinding problem

In the daily use of grinder, we can often find that some operators regardless of the type of grinder, regardless of the type of grinding wheel, arbitrarily use the side of the grinding wheel for grinding, which is a serious violation of safety operating procedures illegal operation behavior.

Diamond grinding wheel working , also known as diamond , is composed of abrasive, binder and filler, is the working part of the grinding tool. The transition , also known as the non-diamond , is composed of a binder, l powder and filler, and is the part that firmly connects the diamond to the matrix.

According to the rules with the circular surface of the working surface of the grinding wheel should not be used for side grinding, the radial strength of this grinding wheel is large, the axial strength is small, the operator will cause the grinding wheel to break, and even hurt people, in the actual use of the process should be prohibited this behavior.

Force operation control problem

In the use of grinding wheels such as diamond grinding wheels, some operating controllers, especially young operators, in order to achieve fast grinding speed, too much force is too strong, which is a very unsafe operating behavior. The flat body of any grinding wheel has a certain strength, so it is likely to cause the crushing of the grinding wheel, and even fly out to hurt people, which is also a behavior that should be prohibited.